Acton Street

A Unique and Bespoke 3D Triangular Multi-Panel Rooflight was Combined with Low Profile Rafter Supports To Add Natural Light To A Commercial Office Space.

  • Client

    Heatherwick Studios

  • Location

    London

  • Contractor

    LBP Services Limited

  • Sector

    Commercial - office

  • Products

    Commercial Rooflights

  • Project Value

    £43k

The design brief

Our brief from Heatherwick Studios was to design, supply & install a free spanning self-supporting 3D triangular rooflight, to replace a more traditional rooflight that was supported by secondary steel.

The Challenge

A rooflight of this type would normally be fully fabricated and welded as a single frame off-site.  The challenge was in the installation of the rooflight as stick construction to align the connection correctly so the glass lines would be true against the framework and the engagement correct. There was only a +/-2mm tolerance.

The Solution

The rooflight is 9m x 4m and is fully self-supporting, modelled with in our SOLIDWORKS 3D design software. The supporting members are a combination of 50mm x 120mm and 50mm x 80mm steel sections. 
The scope of the overall project was to provide offices for Heatherwick Studios.  British designer Thomas Heatherwick founded Heatherwick Studio in 1994 to bring craft, design, architecture and urban planning together in a single workspace.

Whether you’re at planning or construction stage why not see how we could help you add natural light and space to your commercial office space; you can call us on 01223 792244 or pop us an email via info@nextgenrooflights.co.uk outlining what help you need.

Pictures of rooflight installation at Acton Lane, London

A range of pictures showing different aspects of bespoke multipanel rooflight in situ